This document describes a study that takes the URL address from the user and downloads the zip file at this address to the USB then extracts this file to the USB and makes the landing page an .html file within the file. In short, FTI(First Time Installation) auto-launch tab changed as shown in Figure 1. Items removed and Auto launch URL option added.
Figure 1: Auto Launch
You must enter the URL they want to download on this page. The folder name must be Starturl.zip/Starturl/* at the server-side. If .zip file is not wanted to be used, download and unzip operations are not performed and the entered url is set as starturl.
e.g URL: http://server/index.html -> index.html set as starturl and shows on display.
e.g URL: http://server/Starturl.zip -> Starturl.zip file is downloaded to USB and extracted. Then it is set as starturl and displayed.
Figure 2: Entering URL
After the FTI is finished, the user should send the CMS key when he wants to download and extract. The process starts when the CMS key is sent. An internet connection and connected USB are required for the process to start.USB is not mandatory for entered URLs without .zip extension. After the process is finished, the user can see the .zip file and its extracted version on the USB.
The index.html page in the USB is assigned as starturl and this page is displayed. Auto launch option under Signage Menu/Power up Settings, changed as CMS. So that after every power off/on, that index.html file showed. It should be kept in mind that since the index.html page is downloaded into the USB, the USB should be plugged in.
Note: DOWNLOADSTARTURL command perform the same actions.