Picture Commands

Command

Description

Parameter

Return

SETBACKLIGHT

Set backlight pin status.

str-int n (n = ON, n = OFF)

#*setBacklight port to ON

or

#*setBacklight port to OFF

SETBACKLIGHTLEVEL

Set backlight level.

int n (0 ≤ n ≤ 100)

#*Backlight level set to n

or

#*NACK

GETBACKLIGHTLEVEL

Get backlight level.

no parameter

#*The backlight level is …

COLOURTEMP

Set colour temperature.

str-int n (n = normal, warm, cool)

#*setColourTemp() set to n

PICTURERESET

GETCOLOURTEMP

Get colour temperature.

no parameter

#*Colour temp is …

PICTUREMODE

Select picture mode.

Display —-> int n (1 = dynamic, 2 = natural, 3 = cinema, 4 = game, 5 = sport)

Signage —-> int n (1 = signage, 2 = natural, 3 = text, 4 = game, 5 = sport)

#*setPictureMode() set to n

or

#*Incorrect picture mode parameter entered

GETPICTUREMODE

Get picture mode.

no parameter

#*Picture Mode is … for current source

GETCONTRAST

Get picture contrast value.

no parameter

#*THE CONTRAST VALUE : …

SETCONTRAST

Set picture contrast value.

int n (0 ≤ n ≤ 100)

#*Picture contrast value is set to n

or

#*Same value is set. Do nothing.

or

#*Incorrect parameter entered! Value must be in the range 0-100

GETBRIGHTNESS

Get picture brightness value.

no parameter

#*THE BRIGHTNESS VALUE : …

SETBRIGHTNESS

Set picture brightness value.

int n (0 ≤ n ≤ 100)

#*Picture brightness value is set to n

or

#*Same value is set. Do nothing.

or

#*Incorrect parameter entered! Value must be in the range 0-100

GETSHARPNESS

Get picture sharpness value.

no parameter

#*THE SHARPNESS VALUE : …

SETSHARPNESS

Set picture sharpness value.

int n (0 ≤ n ≤ 100)

#*Picture brightness value is set to n

or

#*Same value is set. Do nothing.

or

#*Incorrect parameter entered! Value must be in the range 0-100

PICTUREZOOM

Set picture zoom mode.

str-int n (n = auto, 16:9, subtitle, 14:9, 14:9zoom, 4:3, full(only for HD channels), cinema)

Customer Christie => ( n = auto shows Overscan on Display )

#*setPictureZoomMode() set to n

or

#*Incorrect picture zoom mode parameter entered

GETPICTUREZOOM

Get picture zoom mode.

no parameter

#*Picture zoommode is …

SETNOISEREDUCTION

Set noise reduction.

str-int n (n = OFF, n = LOW, n = MEDIUM, n = HIGH)

#*NoiseReduction set to n

or

#*Missing noise reduction state

GETNOISEREDUCTION

Get noise reduction.

no parameter

#*NoiseReduction is …

BRIGHTNESSUP

Inrease Brightness Level by 1 step

no parameter

Picture brightness value is set to …

or

Picture brightness value is at max value.
You can not increase brightness level further.

BRIGHTNESSDOWN

Decrease Brightness Level by 1 step

no parameter

Picture brightness value is set to …

or

Picture brightness value is at min value.
You can not decrease brightness level further.

CONTRASTUP

Inrease Contrast Level by 1 step

no parameter

Picture contrast value is set to …

or

Picture contrast value is at max value. You can not increase contrast level further.

CONTRASTDOWN

Decrease Contrast Level by 1 step

no parameter

Picture contrast value is set to …

or

Picture contrast value is at min value. You can not decrease contrast level further.

SETMICRODIMMING

Set micro dimming

str-int n (n = OFF, n = LOW, n = MEDIUM, n = HIGH)

#* Set Micro Dimming Level n

or

#*Invalid paramater. Set Micro Dimming Level (OFF, LOW, MEDIUM, HIGH)

GETMICRODIMMING

Get micro dimming

no parameter

#*Micro Dimming Level …

SETCOLOURSHIFT

Set colour shift.

int n (-50 <= n <= 50)

#*Colour shift is set to n

or

#* Same value is set. Do nothing.

#*Incorrect parameter entered ! Value must between defined ranges

GETCOLOURSHIFT

Get colour shift.

no parameter

#*Colour shift is …

SETWB

Set white balance value.

str-int type, value (type = redgain, greengain, bluegain, redoffset, greenoffset, blueoffset) (0 ≤ value ≤250)

#*White Balance is set to value

or

Invalid value for White Balance (0-255)

or

Invalid type for White Balance

INCWB

Increment white balance value by n.

str-int type n (type = redgain, greengain, bluegain, redoffset, greenoffset, blueoffset) (0 ≤ n ≤250)

#*White Balance is set to …

or

Invalid value for White Balance (0-255)

or

Invalid type for White Balance

DECWB

Decrement white balance value by n.

str-int type n (type = redgain, greengain, bluegain, redoffset, greenoffset, blueoffset) (0 ≤ n ≤250)

#*White Balance is set to …

or

Invalid value for White Balance (0-255)

or

Invalid type for White Balance

GETWB

Get white balance value.

str-int type (type = redgain, greengain, bluegain, redoffset, greenoffset, blueoffset)

#* type …

HDR

Set HDR Mode

str-int n (n = ON, n = OFF)

HDR mode is n

or

Invalid parameter…

SETDYNAMICCONTRAST

Set dynamic contrast.

str-int n (n = OFF, n = LOW, n = MEDIUM, n = HIGH)

#*Dynamic contrast value is set to n

or

#*Invalid paramater. Set Dynamic Contrast value (OFF, LOW, MEDIUM, HIGH)

GETDYNAMICCONTRAST

Get dynamic contrast.

no parameter

#*Dynamic contrast is …

SETDYNAMICCONTRASTVALUE

GETDYNAMICCONTRASTVALUE

SETGAMMAPOWER

Set gamma power

int n (limits not clarified)

Gamma Power Mode is set to n

GETGAMMAPOWER

Get gamma power

no parameter

Gamma Power Mode is …

SETGAMUTMODE

Set gamut mode

int n (limits not clarified)

Gamut Color Mode is set to n

GETGAMUTMODE

Get gamut mode

no parameter

Gamut Color Mode is …

SETSATURATION

Set picture saturation

integer(0 ≤ n ≤ 100)

#*Picture saturation is set to ..

or

#*Same value is set. Do nothing

or

#*Incorrect parameter entered! Value must be in the range 0-100

GETSATURATION

Get picture saturation

 no parameter

#*THE SATURATION VALUE

SETDYNAMICBACKLIGHT/BACKLIGHTDIM

Set dynamic backlight

string(

GETDYNAMICBACKLIGHT

Get dynamic backlight

no parameter

#*Dynamic backlight is OFF

or

#*Dynamic backlight is LOW

or

#*Dynamic backlight is MEDIUM

or

#*Dynamic backlight is HIGH

ENERGYSAVING

GETENERGYSAVING

POWERSAVE

GETPOWERSAVE

SETCOLOUR

#*Picture colour value is set to

or

#*Same value is set. Do nothing.

or

#*Incorrect parameter entered! Value must be in the range 0-100

GETCOLOUR

SETFILMMODE

#*Film mode is set to

or

#*SETFILMMODE – Invalid parameter: OFF, AUTO

GETFILMMODE

PATTERN

#*SHOW PATTERN ..

or

#*PATTERN – Wrong parameter : WHITE, RED, GREEN, BLUE, MAGENTA, CYAN, YELLOW, GRAY, BLACK, CLEAR

GETPATTERN

 FREEZE

#*Freezed

or

#*UnFreezed