Network Commands

Command

Description

Parameter

Return

set_IP_address

#*IP address setting Succesfull

or

#*IP address setting NOK

get_IP_address

Get IP address of eth0 network interface. Usage: get_IP_address

no parameter

#*IPaddr: …

SAVEWIFIPROFILE

Save access point to wifi_profile.

str-int ssid, bssid key

Profile saved.

or

Number of profiles exceeds the maximum number to be stored.

Wifi

checks if given SSID wifi is found or not and returns Pass or Fail.

str-int ssid

#*Pass

or

#*FAIL

GETNETWORKTYPE

get network type (eg. GETNETWORKTYPE)

no parameter

#*the network type is <network-type>

SETSUBNETMASK

#*set subnet mask: nnn.nnn.nnn.nnn

or

#*setting subnet mask is failed

GETSUBNETMASK

get subnet mask (eg. GETSUBNETMASK)

no parameter

#*the subnet mask is nnn.nnn.nnn.nnn

SETDEFAULTGATEWAY

#*set default gateway: nnn.nnn.nnn.nnn

or

#*setting default gateway is failed

GETDEFAULTGATEWAY

get default gateway (eg. GETDEFAULTGATEWAY)

no parameter

#*the default gateway is nnn.nnn.nnn.nnn

SETDNS1

#*set DNS server 1 to: nnn.nnn.nnn.nnn

or

#*setting DNS server 1 failed

GETDNS1

 get DNS server 1 (eg. GETDNS1)

 no parameter

#*DNS server 1 is nnn.nnn.nnn.nnn

SETDNS2

 #*set DNS server 2 to: nnn.nnn.nnn.nnn

or

#*setting DNS server 2 failed

GETDNS2

 get DNS server 2 (eg. GETDNS2)

 no parameter

 #*DNS server 2 is nnn.nnn.nnn.nnn

GETINTERNETSPEED

get internet speed

 no parameter

  #*The internet speed is … Mbps

SETPROXY

Sets proxy configuration

string (nnn.nnn.nnn.nnn:nnnn)

#*addr = nnn.nnn.nnn.nnn, port = nnnn

GETPROXY

Gets proxy configuration

no parameter

#*Current proxy is nnn.nnn.nnn.nnn:nnnn

or

#*No proxy address

CLEARPROXY

Clears proxy configuration

no parameter

#*Proxy was cleaned

GETWIFIAPPCHANNEL

GETBLUETOOTH

#*Device does not support Bluetooth

or

#*Bluetooth is not enabled

or

#*Bluetooth is enabled

GETWIFIAPTXPOWER